For months my poor Raspberry Pi B+ had to sit on my desk without a case. Naked, slipping around on the glass surface and in danger of being smothered by a layer of dust. No longer! I finally found the perfect case, or as close to perfect as I could get for only $5.
For the first few weeks, organizing my components mostly consisted of storing them in separate bags. This works well for larger parts like jumper wires and LCDs. Smaller components require a different approach, or you’ll either end up with shelves filled with piles of plastic bags, each tiny bag containing just a few LEDs or tactile switches, or large bags full of resistors that you’ll have to dig through for 10 minutes whenever you need a specific value.
Shortly after I started experimenting with electronics, I discovered my fascination with LCDs and other displays. For me, these screens are not just about providing a convenient way to display visual feedback. Any green backlit 16×2 display will probably suffice in most situations. It’s more about expanding my collection, and playing around with all the different colors, form factors and display technologies. I love having shelves full of screens, and thinking about possible projects I could embed them in. Perhaps one day I’ll have a use for them all, but for now the pile just keeps growing.
One of the first displays I bought was this 1.3″ 128×64 monochrome white OLED display from Adafruit. I was aware of the cheaper options on eBay and sites like Banggood and AliExpress, but since this was my first try at working with one of these screens, I wanted to make sure that any issues would most likely be caused by my own mistakes, and not related to product quality.
This is how it started. With a Raspberry Pi B+, a breadboard, and a handful of parts to play with.